Rail lubricants
-
UW 500 / P3 wheel flange / rail grease
With added graphite. For the lubrication of the contact surfaces between the wheel flange and the rail flank, as well as for the lubrication of the sliding surfaces on switches, drawbars and bumpers.
Approved and recommended by name for REBS wheel flange lubrication systems.
HETG, NLGI class 000> PDF-Safety data sheet
-
UW 500 / P4 organic fat
Universal grease for the lubrication of roller and plain bearings and other lubrication points. Release agent against freezing of hydrant and manhole covers. (Base oil: rapeseed oil.) HETG, NLGI class. 2
> PDF-Safety data sheet
-
UW 500 / P2 long-term EP bio grease
Long-term EP bio-grease for the lubrication of roller and plain bearings and other lubrication points. (Base oil: synthetic ester.)
HEES, NLGI class 2 -
Kompressol UW 500 organic fats
have good adhesion, are resistant to oxidation and are stable to kneading. In addition to good water resistance, they also have very good corrosion protection properties.
-
UW 500/FSCB
Reliable driving head lubrication.
-
UW 500 / 27H (viscosity at 40 ° C: 180 mm² / s) UW 500 / 46H (viscosity at 40 ° C: 46 mm² / s)
For use in wheel flange lubrication systems and rack and pinion lubrication systems when emergency running properties are required in addition to reliable lubrication.
> PDF-Safety data sheet
-
UW 500/17 rail and switch lubrication
Avoids high environmental pollution with loss lubrication, where lubricants drip off or penetrate into the soil.
-
UW 500/12 environmentally friendly bio-lubricant
For use in wheel flange lubrication systems and slide bearings as well as for gear wheels, saw blades and saw frames.
-
Compressol-UW 500 bio-oils
The groundwater compatibility of the Kompressol-UW 500 bio-oils is particularly confirmed by the expert opinion of the IWL Cologne (Institute for commercial water management and air purification e.V.) on the behavior of Kompressol-UW 500 / oils in aquatic systems.